Choosing the Right Ring Size for JB

I’m a bit concerned about choosing the right ring size for my JB. I typically use a 1 7/8 ring with CB6Ks and it fits perfectly, but since my testicles are quite large, I worry they might not slide through a solid ring easily. Has anyone else dealt with this issue?

Another option is to head over to the hardware store and pick up an inexpensive steel O-ring for a better feel.

> member_fb2e9d8920 wrote: > Another option is to head over to the hardware store and pick up an inexpensive steel O-ring for a better feel. Harbor Freight offers cases of plastic O-rings for less than $10, with sizes ranging from small enough for nipples to large ones that fit most cock and ball setups. The step between each size is very slight, and they provide both metric and SAE options. If you use them to gauge the right chastity ring size, just be mindful not to stretch or distort the shape too much since rubber can flex more than a rigid cage ring does. By the way, I've used some of these O-rings for various types of sexual play. It doesn't take much imagination to find new uses. Plus, if you ever need an O-ring for everyday purposes outside of kink, it's handy to have on hand.

Alternatively, you could just put together your CB ring yourself. Since the steel JB ring is easier to work with, this serves as a good trial run.

Right now I don't have anything on hand to test it out myself. My wife is mailing me the sizing rings, but postal delivery takes forever here. Thanks for the advice!

> member_c5a7c75d7b wrote: > Alternatively, you could just put together your CB ring yourself. Since the steel JB ring is easier to work with, this serves as a good trial run. That method worked for me as well.

> I'm a bit concerned about choosing the right ring size for my JB. I typically use a 1 7/8 ring with CB6Ks and it fits perfectly, but since my testicles are quite large, I worry they might not slide through a solid ring easily. Has anyone else dealt with this issue? I previously owned a CB6K before getting the JB. For that model, I used a 1 3/4 ring. However, when measuring it while attached to the top part of the cage, the horizontal span was 1 3/4 but the vertical height was only 1 5/8. I ordered two oval rings from MM: one sized at 1 3/4 and another at 1 5/8. With these oval designs, the vertical measurement shrinks by about 1/8 while the horizontal expands by 1/8—so the 1 3/4 ring effectively becomes roughly 1 7/8 horizontally by 1 5/8 vertically. I didn't want to risk losing time waiting for a replacement if it fit wrong, so I ordered one slightly larger than my CB size and one slightly smaller. As it happened, the larger ring worked straight out of the box for continuous wear. I tried the smaller one about three days later, but it was too tight; after just a few hours, ball pain forced me to remove it:cry:. Six months down the line, however, I've found that 1 3/4 is now too loose. So currently, I'm wearing the smaller ring around the clock, and my keeper has only let me out three times in the past month without any trouble:D. MM also sells dedicated sizing rings for you to try.