Transitioning from the CB6000s Over to the Holy Trainer V3 with a Smaller Tube

After years of using CB products exclusively, my Wife had me change to the Holy Trainer based on research she had done. My problem has always been that my balls are high and tight, even though my sac has gotten much longer and looser from being locked all the time. It was still a problem with the CB. And every now and then, my left testicle would slip out … requiring me the uncomfortable call to my Wife to explain what happened and get authorization to use the emergency key. If I would squat down, my ball would pop out. If it was very cold outside, my balls would tighten and my left ball slip out. It was really a problem, but dealt with it for years. The solution was not a smaller ring … the smaller ring was way too small. So,my wife did her research and made the decision to lay out the money (of course it came out of my allowance) and we ordered the Holy Trainer. I was worried I would have difficulty getting the one piece ring on, but it was actually quite easy. Slipping the tube on and into place was easy as well (easier than the cb6000s). When everything slipped into place and the lock was inserted, I could instantly feel the greater security. You see, my penis is now pressed between my ball sac, with the effect of pushing my balls forward and around the tube. There is no slippage … no slippage at all. The smaller tube completely compresses my penis and there is never any extra room which completely stops erections. I can feel it try to get erect at night in bed, but it can’t expand at all. My Wife is totally in love with this new chastity device. It makes me look ridiculously small and I feel no sensations while wearing it. It fits perfectly in a small pair of panties.

Interesting. We are about to try the exact same thing - switching from the CB6000s to the new H-T V3. Got a few questions though ... Because of something their website says I'm uncertain about something ... once the ring and tube are assembled and the locking device in place, does the assembly never come apart again? Or does it? Can you unlock, pull the lock out and disengage the tube from the ring? I want to order two tube sizes and two or even three ring sizes, so I can try the combinations to find the right one; but as I say something on their website, in reference to ordering an additional tube, says "The tube is inserted into the inside of the ring. Once the cage in place, it is impossible to remove the device." Surely that can't be right? Or am I misunderstanding what it means/implies? Yeldarb

It's a translation issue, the holy trainer is locked and unlocked like any other device, with the integrated lock being a bit more discreet.

I'm wearing the HT v3 nano and love it. It is very secure and comfortable. It hides well under clothes and it encompasses the penis completely.

I am thinking of buying a HT v3 for additional variety. I see that the company is based in Switzerland. How long does it take for delivery in the US?

Thanks for the feedback. Yes, you're right Reinest ... I spoke with them today (the number is on the website) and it looks like there's a little "lost in translation" going there - what he says he means is that it will not come off while being worn, not that it doesn't diss-assemble! Dumb of me really but I just wanted to check. I ordered mine today through the website and paid for the expedited so I get it (in the UK) in 48 hours via FedEx or similar ... I'd guess that U.S. would maybe take four or five days or so? Not sure if I'll get slapped by customs fees, import duty/tax or what have you, but hey, there are no free lunches - it will be whatever it will be ... can't imaging that Switzerland has negotiated chastity Device Free Trade deals with the EU or U.S.A. yet ... I don't suppose they are near the top of the list of internationally traded goods and services somehow! If anyone is interested I'll let you all know how I get on with the "install" once it arrives ... Sara, my KH is super pleased its on the way!

I see the questions were answered. 48 hours means 48 hours ... it's amazing how quickly it gets to the United States. I absolutely love this device, and so does my wife. There were many times that she thought it "conveniently" slipped off. It just doesn't with this Holy Trainer. It's quite a bit more comfortable. I had originally purchased the 40 ring and it was just too tight and actually made cuts on my scrotum. The 45 is much better, but I would love it if they made something in between ... like a 43 or 43. rickiee

Unfortunately my experience with ordering from them wasn't as nice. Despite also ordering the expedited shipping, I didn't get any response to my order until an full week after I placed it, and then the order arrived a few days after that. I hadn't got any order confirmation, no shipping details, and I haven't been able to get in touch with them since.

Hmmm, interesting. As it happens I couldn't raise them by 'phone until Jan 4 and since around Dec 22nd the online ordering tool wasn't working, then suddenly it was yesterday! I got my order conf this morning - I suspect that the admin, order processing, distribution side of the biz is somewhat of a part-time operation, or at least they aren't a biz that does a minimum of a nailed on 9 'till 5, five days a week, every week without fail or 'distraction'!

It took about 7 days to get my HT in the USA. They did give a tracking number and web site so I could follow it through customs. I did not go for the 2 day delivery. I think they said 5 days on the option I chose.

I guess my timing was good. I couldn't be happier with their service. I ordered two times, one week between orders and each order came within the 48 hours. The only issue I had the first order was that their day is our night ... so it delayed the order being placed. The second order was placed at night, their morning, and it was perfect. I love the Holy Trainer V3. It is an amazing piece and it's hands down better, in my opinion, than the cb6000s. I will admit that I do love my cb6000s ... it's been a part of my life for years now.

Well, mine has arrived, and after some uncertainty it went on easily. If, like me, you've been in a CB of some kind (the 6000s in my case) then initially it took a while to 'decode' the assembly - it is very different, but once I got it right it went on a dream. A couple of weeks ago I found a vid of a guy putting one on but can't find it again - I'd love for my KH to view that - anyone know of one?

When you remove the cage, do you leave the ring on? One of the things about using the solid rings in the other devices I have, is that it acts like a cock ring - Mrs. Edge likes (in fact, prefers) that I can leave the base ring on after removing the cage because it acts like a cock ring. The HT ring looks a little weird for that purpose, and I'm looking for some input.

Tom, I don't leave the ring on because the attachment mechanism at the top has sharp edges and protrudes quite a bit. It really wouldn't work well as a cock ring. Aside from that, it's a great improvement over the CB products, in my opinion. It does provide for a better fit, for me ... thus much more secure. My left testicle would pop out of my CB 6000s and I couldn't get it quite right. No ring was exactly right for me. The design of the ring and sizing is perfect for my high testicles ... though they have gotten longer over the years of wearing the chastity devices

> member_2eb138a5a4 wrote:Tom, I don't leave the ring on because the attachment mechanism at the top has sharp edges and protrudes quite a bit. Yeah, I've been looking at all the different online places - Amazon, AliExpress, DHGate, etc., to see if I could figure out what that shape might be, but I haven't seen a view that gives me a definitive answer, so I figured I'd ask the little-brain trust.

It just occurred to me that a possible work-around might be to unlock the steel HT, remove it, and then replace it with a section of one cut from a plastic HT that just eliminates the sharp edges. That might be too much fiddling, though, something that violates my Comfort, Convenience, and Security model.

Ok gentlemen, those of you with the HTv3 who have worn a HTv2 previously: Have you noticed (yet) is there any tendency for the fit of the tube into the ring to stretch or enlarge, etc.? My HTv2 became "worn" with use and age. The tolerance of the molded fit between the two parts increased and the tube would no longer fit tightly into the ring. This caused the gap between the ring and tube to enlarge, resulting in testicle slippage. I'm hoping the new v3 will not "stretch" and the gap will stay constant. Your experiences?

I have only had it a few weeks so it's too soon to tell. It fits together precisely and so far has been terrific. My Wife is so pleased and that makes me very happy,.

Just thought I'd chime-in about the V3 I took delivery of a couple of weeks ago. Apart from for a biz trip I have had it on ever since I have to say I think it is great. Way more comfortable (for me at least) than the CB's were and really very comfortable indeed - creating a sort of semi permanent mid edge buzz much of the time. My KH loves it too - far prefers it from the CB, for all sorts of reasons - not least that when sat in front of me standing, she can install it on me without needing a phd in precision materials handling!

How's it working out now that you've had it for a bit? We don't get a chance to play with chastity often enough for me, but last week or so I broke the "ear" on the CB6000S ring again and am interested in trying something different.

Ive been wearing one for a while now. While I'm not the most active fellow, I have noticed that the tube and ring dont tightly fit together anymore. Not that it's loose, total movement between the 2 is probably about the size of a hair. My only issue is with my own anatomy, I find during the course of the day I tend to end up pointing upwards into the top of the tube. Still prevent erections, but its very awkward, and ends up looking kinda weird. Also makes me have to fiddle with things if i need to the use the restroom, which can be a hassle. I'm slowly starting to think that perhaps a piercing with a device to keep things pinned in place may be the route to go for me.

Does anyone know what metal the HT v3 Magic Locker is made of? Has anyone gone through a metal detector wearing one?

I don't have a HT one, but I do have others. They are made from brass, with small steel pins inside.