Chastity and orgasm denial discussion

Hi there, I’ve been quietly observing and am quite keen on acquiring a CB-X type cage, but I’m facing an issue: my testicles don’t descend as far as some people’s do, leaving me with a fuller base. This makes it really difficult for me to put on a CB ring smaller than roughly 2.5 inches. Perhaps I’m just unusual in how I was built compared to others? Could anyone offer any tips or advice regarding this? I actually emailed CB directly to ask if they carried a 2.5-inch ring, but haven’t heard back yet. I considered trying stretching methods, though it might take quite a while for the “pork” and “beans” to separate sufficiently. Let me know your thoughts. Kaz.

> kazarak said: > Hi there, > I’ve been quietly observing and am quite keen on acquiring a CB-X type cage, but I’m facing an issue: my testicles don’t descend as far as some people’s do, leaving me with a fuller base. This makes it really difficult for me to put on a CB ring smaller than roughly 2.5 inches. Perhaps I’m just unusual in how I was built compared to others? Could anyone offer any tips or advice regarding this? I actually emailed CB directly to ask if they carried a 2.5-inch ring, but haven't heard back yet. I considered trying stretching methods, though it might take quite a while for the "pork" and "beans" to separate sufficiently. > Let me know your thoughts. > Kaz. > Click to expand... Dollyanne dealt with similar concerns regarding this when using the CB-2000. She initially used hair scrunchies, then experimented with various ring sizes beforehand to find what worked best for her. Dolly discovered that she could manage a 2-inch ring by putting it on while soaking in a hot bubble bath. Her testicles are also positioned high and tight, but the warm water helped them hang lower. This allowed her to slide one testicle through at a time into the ring, after which she pushed her clitoris down and through as well. It requires some practice, but Dollyanne has succeeded in doing it. Dollyanne mostly does this while soaking in a bubble bath, though she has also managed it during hot showers. While wearing the CB with a 2-inch ring paired with the largest spacers, Dollyanne noticed her testicles began to stretch. This was another worry for her because she feared she might need something like the "parachute" device. However, several members here (including slave kris and mikecb) reassured dolly that she would indeed stretch. It happened just as expected. Dollyanne gradually reduced her ring size down to 1 7/8 inches and switched to the second-smallest spacers. This process took about 45 days of nearly constant wear, though there were moments of pain! It definitely requires effort! Your situation might be different, but dolly suspects you could fit into a 2-inch ring by using that same hot bubble bath method. If you haven't tried it yet, she recommends giving it a shot since most chastity devices have a maximum ring size of around 2 inches. Another option is to get one custom-made for your specific anatomy. You might want to check with maturemetal on the site. He crafts metal devices and could likely create something suitable for you. (Though dolly suggests confirming that getting into a 2-inch ring works first, as you WILL stretch.) Hugs,:butterfly: ***dollyanne***

Thanks for the reply. I have another question: I haven't decided which style to go with yet. Many people seem to prefer the CB3000; how does it stack up against the 2000 and the 6000, considering what I mentioned earlier?

> kazarak said: > Thanks for the reply. I have another question: I haven't decided which style to go with yet. Many people seem to prefer the CB3000; how does it stack up against the 2000 and the 6000, considering what I mentioned earlier? > Click to expand... Dollyanne selected the 2000 primarily due to its price point and ease of cleaning, but mostly because it came in PINK! Many users here and elsewhere have reported splitting issues—particularly with the 6000 model, although some find the 3000 more comfortable than the 2000. Dollyanne fits the 2000 well since she is "compact," having slightly more girth than length (5.5 inches vs. 4 inches). While dolly hasn't fully verified this herself, others with larger girth have mentioned they can fit into both the 3000 and 6000 models. The Curve model seems preferable if you have a lot of length. That said, the 2000 does have its drawbacks. It needs sanding in certain spots, the guide pins must be trimmed as you stretch out and move to smaller spacers, and finding the right combination of ring and spacer takes time. Hope this assists. Others with more experience might provide even better insights. Hugs,:butterfly: ***dollyanne***

Everything stretches eventually over time. Before I acquired my CB3K, I used to wear a "collar" around my testicles. I constructed this collar from a section of narrow metal band clamp—the type with the side screw that allows you to tighten it around a pipe. I lined it with rubber cut from a bicycle tire inner tube. Using super-glue, I attached the rubber lining to the strap and used a small hex-head screw to keep it closed. I also glued the nut onto the inside of the strap beneath the rubber layer. By varying the width of the straps, you can easily create your own set of "ball stretchers".

One more question: is it possible to get "stuck" in one of these? I’ve never worn a device before but was curious. Has anyone ever gotten stuck with something like the houdini or similar devices where they couldn't get out?

In my experience with the CB-xxxx series, they tend to come off too easily. I wouldn’t worry about them getting stuck unless you mix up your lubricant with super-glue!;-p mikecb

hi everyone, I’ve gone through three CB Curves in a very short period. Each one broke—and all at the same spot—the plastic area that anchors the right-hand pin on the cage starts to crack and eventually snaps (by "eventually" I mean within two to three days of wearing). Prior to this, I tried the CB3000 but it caused significant blistering because it was simply too tight and confining for my clitty. Wonder if anyone else has had similar experiences. lola

I previously owned a CB3000 but switched to the CB2000. Personally, I love the tighter sensation, which made me feel properly caged, and I also found it more hygienic since the CB3000 is mostly enclosed, meaning the skin stays damper.

Try tying a cord around where the c ring sits and tightening it daily. Apply coconut oil cream and keep adjusting. After a couple of weeks, the ring will fit properly. When putting on any CB device, it’s advisable to tie ribbon or cord around the cring to prevent a ball from slipping back. Also, grab a spacer kit from LMS4620 for only 61 items; it's cheaper than millers' 5-piece kit. This is especially useful with the 6k model as it allows adjustment down to 0.5mm on all gaps and provides enough packing for the guide pins to keep the unit solid. They now offer stainless steel cb6k pins. When the cage flexes, a ball can escape. Wear the lockpin inserted from the front to prevent the lock from fracturing the cage. The 6 model is prone to this because the lockpin hole is positioned somewhat poorly through the seam. Also, that particular cage isn't quite substantial enough. I'd give it 0 out of ten for millar quality.