Chastity device discussions and reviews discussion

After testing out both the CB-3k and 6ks, I’ve discovered what many of you have already noted: I can slip free from either device with relative ease when flaccid. The POIs don’t stop me from pulling out; they just hurt while aroused. Size doesn’t seem to be a factor here. I’ve also experimented with KSD’s models. Neither the G1 nor the G2 blocks pullout for me, though they do make it harder. Besides that, the G2 can inflict significant pain and damage. The G1 fits too snugly; I dislike having a ring constricting my member constantly because it feels like asking for pressure sores, plus hygiene concerns bother me.

Because of these factors, I decided to get a frenum piercing. It’s been just over a month now, and the healing is going well. Now that it has healed enough, I want to put it to use. I’ve looked at some of Lori’s tubes; they’re lovely but slightly beyond my budget.

So, my objective is to find a way to secure the 6ks using this new piercing. A few concepts have popped into my head, but I’d rather not start drilling holes or spending money on jewelry and locks until I’m confident in what will work. I’m hoping there are others here with similar needs who have already solved how to keep either a 3k or 6ks locked via their frenum piercing. Currently, the strongest idea is drilling two small holes at the base of the 6ks that line up with my piercing, then threading a surgical steel lock through from below so it hangs downward. The pressure should be low, and snagging seems unlikely. There’s just one minor hurdle: figuring out how to thread the lock through the piercing when I can’t move much inside the cage.

I want to think this over carefully and account for all variables before proceeding further. Many of you are likely wrestling with the same question, so I’d love to combine our ideas to create a fully secure CB-range setup.

Please share your thoughts or suggestions if you have them, especially if you’ve found your own solution. I’m eagerly awaiting an answer.

Thanks for reading and sharing your valuable feedback.

Hello, The simplest option might be to use a piercing lock*. Ms. Lori stocks one on her website; although I believe it’s designed for PA piercings, it should work perfectly fine for a Frenum piercing too. Alternatively, if the ring sits far enough down in the cage, you can secure it with an external chain and padlock. *This is also available at Steelwerks Extreme! It looks like you’re already on the right track! However, I don’t have a CB6 myself—only a 3k—so I’m not entirely sure if the vent holes align in the same spot. > apathychastity said: > So after trying a CB-3k and 6ks, I have found, as most of you have as well, that I can pull out of either device when flaccid fairly easily. The POI don't prevent pullout, they just cause pain during arousal. Doesn't matter what size I use. I have also tried both KSD devices. The G1 and G2 don't prevent pullout for me, they just make it more difficult. Not to mention the G2 can cause a lot of pain and damage. The G1 is just too tight of a fit, and I don't like the idea of a ring constricting me constantly, it just seems like a recipe for pressure sores, and the cleanliness issues worry me. > Due to the above, I went and got my frenum piercing. It has been just over a month, and it is healing nicely. Now I want to use it. I have taken a look at some of lori's tubes, and while they are quite, nice, they are also a bit out of my reach price wise. > So now I have set off with a goal to find a method of securing the 6ks by using the frenum piercing. A few ideas have come through my mind, but I don't want to start drilling holes and investing in jewelery and locks before I get a really good idea of what might work. I also am coming here with the hopes that there are people just like me, with my same wants and needs, who has figured out how to secure either a 3k or a 6ks by using their frenum piercing. So far the best idea I have had is to drill two small holes in the bottom of the 6ks that align with my frenum piercing and put a surgical steel lock up through the bottom so that it hangs down. It seems like the pressure would be minimal, and the chances of it getting snagged are also small. There's just the one small problem of figuring out how to get the lock through the piercing while being unable to maneuver anything inside of the cage... > I really want to put some thought into this and try to account for all the possible variables before I go any further. I am sure that some of you have been trying to figure out this same exact thing, and I would love to pool all of our ideas together to come up with a completely secure CB-range device. > Please comment if you have any thoughts or suggestions or if you have figured out your own solution to this problem. I am desperate for an answer. > Thank you for taking the time to read this and providing your valuable feedback. > Click to expand...

Could you please share a link to that piercing lock you mentioned? I just ordered the PA cable with loops on both ends and hope it will work. Before placing that order, however, I stopped by Home Depot and bought some 1/8-inch vinyl-sheathed wire along with crimps. I’m thinking of threading this through a frenum ring I picked up yesterday. It might take a bit since I need to gauge up to use the ring properly, but I’ll report back on my progress if anything changes.

Here are two possibilities: (aka Lori's Tubes -- US) Scroll all the way down to #19. (CH is Switzerland, right?) I’ve been curious about similar modifications for PA piercings as well, so I’d be interested in hearing how your experiments turn out. My thought was drilling a hole on the underside of the CB6K tube that aligns with my piercing and using one of those locks above. However, I’m concerned about pinching as the lock shifts around. Also, I have a 4ga hole (5.2mm), while the Lust Lock is only 2.8mm in diameter—roughly equivalent to 9ga.

I’ve seen those lustlocks before, but I was worried about hanging something from my penis and whether the pressure (from the lock's weight) might cause issues for my frenum piercing. But currently, they look quite promising. I’ve exchanged emails with Lori recently, and she seemed very open to me sending a drawing so they could fabricate one specifically. So, if I request a special frenum-type lock from her, it should be possible, though likely more expensive than the standard lustlock price. That said, this option is growing on me: BS-1-500x500.jpg Now I’m just deciding on its position and how to minimize potential weight on the piercing while allowing for arousal without risking stretching, tearing, or pinching. I believe it’s definitely possible and seems more practical than using a captive ring combined with wire and crimps. The only issue for me right now is the time needed to gauge up to 9ga, as you mentioned regarding the lock size. I’m currently wearing my original piercing at 14ga. I have 12ga and 10ga rings waiting in the wings, but it’s only been about a month since I got pierced, so I don’t want to rush down to 9ga immediately. I’ll spend at least this weekend considering my options to find a practical solution. Expect an update within the next week. Thanks for your replies, Stealth.

Hi... I’m still fairly new to chastity, but I’ve had three frenum piercings for over ten years and own a CB6Ks. My first suggestion is to let your piercing heal thoroughly before using it as an anchor. Naturally, you know best how well your body is recovering, but be mindful of the movement and rubbing that will occur once the piercing is secured. Okay, sermon finished—here are my suggestions... There’s plenty of quality body jewelry available that could work to your advantage. Idea #1... Use a double captive curved or circular BB like this and secure it with a lock like above. This method offers slightly less security because popping the bead allows easier removal of the piercing to get out (assuming you have access to ring-opening pliers). Idea #3... If you’re willing to stretch your piercing wider (likely down to 4ga or smaller), you could use a "plug" (essentially a hollow tube) and feed a security cable through it, then into the opening (and padlock as described above).

> apathychastity said: > Now I am just contemplating the position for it, and how to minimize any potential weight on the piercing, and how to allow for arousal without the risk of stretching/tearing/pinching. > Click to expand... Here’s Idea #4 from me... If you like the padlock concept, consider mounting it on top of the cage instead of the bottom. This offers two benefits: First, the shackle's curve aligns with your glans' curve, meaning the lock pulls in a natural direction rather than an awkward one. Second, during normal wear, the weight of the lock body rests against the cage rather than pulling down on the piercing. The main drawback is likely that mounting it high might change the profile of your case slightly and look less discreet.

> digby said: > Idea #4 from me... if you like the padlock, you might consider mounting it on the top of the cage rather than the bottom. This would offer two advantages. First, the curve of the shackle would be in-line with the curve of your glans, meaning the lock wouldn't be pulling in an unnatural direction. Second, for normal wear, the weight of the lock body wouldn't be pulling against the piercing, but resting on the cage. The biggest disadvantage is probably that the lock would alter the profile of your case and might make it look less discrete. > Click to expand... That just gave me an idea: locking a glans ring into the CB. I’m generally hesitant about securing piercings because I tore my PA at work without any device assistance, so everything else has been pretty loose so far lol

> digby said: > Idea #4 from me... if you like the padlock, you might consider mounting it on the top of the cage rather than the bottom. This would offer two advantages. First, the curve of the shackle would be in-line with the curve of your glans, meaning the lock wouldn't be pulling in an unnatural direction. Second, for normal wear, the weight of the lock body wouldn't be pulling against the piercing, but resting on the cage. The biggest disadvantage is probably that the lock would alter the profile of your case and might make it look less discrete. > Click to expand... Placing it on top sounds like an interesting way to reduce pressure, but I really can’t afford a device that looks any less discreet than my current setup. I already have to wear different boxers or briefs just to accommodate the 6ks. Nothing is set in stone yet, but I’m working on it...

During my recent testing, I discovered that I can actually orgasm while wearing the CB6Ks. The same result occurred with the 3k as well. There was just enough friction to trigger ejaculation. Quite disappointing. To prevent this from happening again, I need to figure out how to make the device either more restrictive or painful. At this point, I’m seriously considering one of Lori’s tubes. My wallet is bracing itself.

Hi.... I wore a CB2000 for a couple of years and had the same issue with pulling out. I also have a frenum piercing. Not wanting to be less secure than my wife preferred, after some trial and error, I ran a thin stainless steel chain through the sides of the CB2000 and through my solid seamless frenum ring, locking both ends into a padlock. This method makes pullout nearly impossible; you’d have to cut the chain or destroy the chastity device to escape. A few weeks ago, I bought The Fort (a stainless steel device) but was slightly disappointed when I found I could still pull out of it too. It was harder than with the CB2000, and even possible in the shower with soap and water. The chain idea didn’t work for this one due to its solid sides and angle; it looked like escape might be feasible, leaving me unhappy until an inspiration struck. Since the slot at the end of the cage is vertical, my frenum ring couldn't pass through without twisting skin or pinching. So, I added two stainless steel spacers that came with The Fort onto my frenum ring to align it with the cage’s slot direction. They fit well enough to place a second padlock on them. The padlock stays outside, the frenum ring inside, and the two spacers remain in the end slot. It acts almost like an unbreakable 3-link chain. Pinching is minimal—only occurring if I sit incorrectly on my testicle. I use a "Master Luggage Lock" with rounded edges to avoid sharp points bothering me. The device is now totally secure, and I’m not going anywhere soon. I’ll try to get a photo but need my wife’s permission first. I can make a sketch in Paint and post it later. Hope this idea helps! Barbara. P.S.... Here is the sketch I made for you. The two spacers are side-by-side, taking up almost the full width of the slot so the lock and frenum ring don’t turn or slip through. It’s crucial that those spacers stay in place, or you’ll get pinched hard (ask me how I know....LOL). I’m wearing an 8G barbell with a stirrup; there’s no way to reach inside and unscrew the balls to remove it. I am happily at my Keyholder's mercy for release from this setup.